ISOCLIP in Pozzolengo
Project: Pozzolengo (BS): the new look of a gas station thanks to ISOCLIP®
Who said that a gas station only has to be functional?
In Pozzolengo, in the hinterland of Lake Garda, a gas station gets a makeover with ISOCLIP®, the insulating panel with a porcelain finish that combines technical performance and aesthetics.
– Thermal and acoustic insulation
– Customized look thanks to a wide choice of finishes
– Quick installation, even in difficult thermo-hygrometric conditions
– Impact resistance and zero maintenance
– Three types of insulation materials: Aerogel, Glass Wool, EPS
With ISOCLIP®, comfort meets design, even in the most unexpected places.
Location: Pozzolengo (Brescia)
Year: Beginning of works 2025
Products: EPS Panel and Porcelain Stoneware Finish
Aesthetics and insulation in one panel!
Even a portion of a building can change its apperance and transform its aesthetics into a sleek, modern and, most importantly, perfectly insulated building.
How ISOCLIP® is made
Equipped with an insulating panel (in Aerogel or Glass Wool or EPS with graphite), ISOCLIP® is internally constituted by a powerful insulating stratigraphy. The adhesive layer in contact with the ceramic slab and the stainless steel hooks facilitate the installation of a porcelain stoneware slab for a quality, resistant and long-lasting aesthetic result.
ISOCLIP® arrives on site already pre-assembled and ready for installation. It is mounted directly on the external walls of the building, without resorting to invasive work or demolition, with installation times reduced by 50% compared to a traditional insulation coat.
Installation
The correct direction for the installation of ISOCLIP® panels is from the bottom, starting from the right and proceeding leftwards.
The ideal team of operators consists of 3 to 4 people who can lay between 70 and 90 square meters per day.
Glue application can take place at temperatures between 5° and 35°C.
ISOCLIP® can be laid on different types of wall.
Comply with the following steps:
– Checking the coplanarity of the substrate; in case of unevenness, a skim coat can be used;
– Check the type of dowel to be installed, the system weighs max 20kg/sqm;
– Cleaning of the surface and/or application of a primer (not mandatory);
– Laying of the starter profile and verification of alignments;
– Laying of glue with a notched trowel with parallel rifling to the short side on both support and Isoclip® panel with C2TES2 glue;
– Fixing with dowels (No. 4 per panel);
– Adjustment of panel flatness and joints (4-5 mm);
– Polyurethane grouting and the creation of expansion joints every 12 sq. m. at maximum
(Can be performed as early as 24 h after the panel installation);
